Saltar al contenido principal

Aviso: Estás editando una guía de prerrequisito. Cualquier cambio que realices afectará a la guía que incluye este paso.

Inglés
Español

Traduciendo paso 2

Paso 2
Pull the control board away from the radio body.  It will be slightly more stubborn than the face plate was. There are two connectors that have to be disconnected.  Pull hard enough to separate the connectors, but not hard enough to pull them off of the circuit board.
  • Pull the control board away from the radio body. It will be slightly more stubborn than the face plate was.

  • There are two connectors that have to be disconnected. Pull hard enough to separate the connectors, but not hard enough to pull them off of the circuit board.

Insertar traducción aquí

Insertar traducción aquí

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.