Saltar al contenido principal

Aviso: Estás editando una guía de prerrequisito. Cualquier cambio que realices afectará a todas las 4 guías que incluyen este paso.

Inglés
Japonés
Paso 7
Use a fingernail or opening tool to pry the plastic lower assembly away from the display assembly. Do not completely separate the lower assembly from the display assembly yet. There is a cable connecting the two that must be disconnected first. Do not completely separate the lower assembly from the display assembly yet. There is a cable connecting the two that must be disconnected first.
Open the inner assembly
  • Use a fingernail or opening tool to pry the plastic lower assembly away from the display assembly.

  • Do not completely separate the lower assembly from the display assembly yet. There is a cable connecting the two that must be disconnected first.

指先もしくは開口ツールを使って、ディスプレイアセンブリからプラスチックの下部アセンブリをこじ開けます。

下部アセンブリをディスプレイアセンブリから完全に外さないでください。まず先に接続を外さなければならないケーブルが繋がったままです。

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.