Saltar al contenido principal

Aviso: Estás editando una guía de prerrequisito. Cualquier cambio que realices afectará a todas las 4 guías que incluyen este paso.

Inglés
Italiano

Traduciendo paso 1

Paso 1
Using the flat end of a spudger, gently pry the right speaker/subwoofer cable connector straight up off the logic board. Be careful not to lift the socket. Pull the connector toward the optical drive.
  • Using the flat end of a spudger, gently pry the right speaker/subwoofer cable connector straight up off the logic board. Be careful not to lift the socket. Pull the connector toward the optical drive.

  • Pry up from beneath the wires.

Usando l'estremità piatta di uno spudger, stacca dalla scheda logica il connettore del cavo dell'altoparlante/subwoofer di destra. Stai attento a non sollevare la presa. Tira il connettore verso l'unità ottica.

Agisci da sotto i cavi.

-[* black] Using the flat end of a spudger, pry the right speaker/subwoofer cable connector straight up off the logic board. Be careful not to lift the socket. Pull the connector toward the optical drive.
+[* black] Using the flat end of a spudger, gently pry the right speaker/subwoofer cable connector straight up off the logic board. ***Be careful not to lift the socket. ***Pull the connector toward the optical drive.
[* icon_note] Pry up from beneath the wires.

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.