Saltar al contenido principal

Aviso: Estás editando una guía de prerrequisito. Cualquier cambio que realices afectará a todas las 5 guías que incluyen este paso.

Inglés
Chino
Paso 4
Place the edge of a curved blade into the thin gap between the display and the outer case.  Start at the short side of the display, closest to the digital crown. Press firmly straight down into the gap. Once inserted, tilt the blade to pry the display open slightly.
  • Place the edge of a curved blade into the thin gap between the display and the outer case. Start at the short side of the display, closest to the digital crown.

  • Press firmly straight down into the gap.

  • Once inserted, tilt the blade to pry the display open slightly.

  • Do not insert the knife more than 1/16th of an inch (~2 mm) to avoid damaging the Force Touch sensor.

将弯曲刀片的边缘放入显示屏和外壳之间的细缝中。从显示屏的短边开始,最靠近数字表冠。

用力向下笔直插入间隙。

插入后,倾斜刀片以撬开显示屏。

切刀插入的距离请勿超过1/16英寸(〜2 mm),以免损坏Force Touch传感器。

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.