Saltar al contenido principal
Inglés
Español

Traduciendo paso 3

Paso 3
Remove the two 4 mm Phillips #00 screws that secure the card to the board. Gently lift the card up and pull it out of its connection slot. The Wi-Fi card is now removed.
  • Remove the two 4 mm Phillips #00 screws that secure the card to the board.

  • Gently lift the card up and pull it out of its connection slot.

  • The Wi-Fi card is now removed.

  • When inserting the new Wi-Fi card into the connection slot, place the card at a 40 degree angle and push it all the way back, then lay it flat.

Insertar traducción aquí

Insertar traducción aquí

Insertar traducción aquí

Insertar traducción aquí

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.