Saltar al contenido principal
Inglés
Español

Traduciendo paso 11

Paso 11
Remove 3 screws holding the all-in-one cable in place. (could not tell screw type from the pictures) Remove three more screws. Remove 5 more screws holding the logic board intact (there may be more screws to remove that I could not see in the pictures, just be aware of this and be prepared to remove more screws)
All-in-one cable & logic board removal
  • Remove 3 screws holding the all-in-one cable in place. (could not tell screw type from the pictures)

  • Remove three more screws.

  • Remove 5 more screws holding the logic board intact (there may be more screws to remove that I could not see in the pictures, just be aware of this and be prepared to remove more screws)

Insertar traducción aquí

Insertar traducción aquí

Insertar traducción aquí

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.