Saltar al contenido principal
Inglés
Español
Paso 5
Lift the analog board assembly by holding onto the edges of the board. You may need to guide the analog sticks to clear the holes in the front panel while lifting the assembly. Be careful not to pull on the ribbon!
Lift the Analog Board
  • Lift the analog board assembly by holding onto the edges of the board.

  • You may need to guide the analog sticks to clear the holes in the front panel while lifting the assembly.

  • Be careful not to pull on the ribbon!

  • Flip the board over so that the analog sticks are now facing upwards. Set it above the controller.

Insertar traducción aquí

Insertar traducción aquí

Insertar traducción aquí

Insertar traducción aquí

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.