Saltar al contenido principal

Aviso: Estás editando una guía de prerrequisito. Cualquier cambio que realices afectará a todas las 9 guías que incluyen este paso.

Inglés
Español

Traduciendo paso 1

Paso 1
The camera bracket is attached to the front panel by adhesive. The use of an iOpener to soften the adhesive is highly recommended.
  • The camera bracket is attached to the front panel by adhesive. The use of an iOpener to soften the adhesive is highly recommended.

  • Follow the iOpener heating instructions described in the iOpener heating section at the beginning of this guide.

  • Be careful not to overheat the iOpener during the repair procedure. We recommend waiting at least two minutes before reheating the iOpener.

  • Place the iOpener over the front facing camera on the front edge of the top of the display.

Insertar traducción aquí

Insertar traducción aquí

Insertar traducción aquí

Insertar traducción aquí

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.