Saltar al contenido principal
Inglés
Español
Paso 2
Position the license plate frame and center it on the VW emblem and parking camera (below, if installed). You can use the vertical supports in the lower grill (hard to see in this pic) to assist in alignment. Hold the license plate frame in place using some painters tape.
  • Position the license plate frame and center it on the VW emblem and parking camera (below, if installed). You can use the vertical supports in the lower grill (hard to see in this pic) to assist in alignment.

  • Hold the license plate frame in place using some painters tape.

  • Using the Sharpie, mark the four holes that you'll be drilling.

Insertar traducción aquí

Insertar traducción aquí

Insertar traducción aquí

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.