Inglés
Español
Paso 3
Optional: align bearings so that ball races are offset as shown. Clip Carriage onto Bearings.  It will hold itself in place Tighten Zip Ties. Cut them relatively flush to avoid them being an obstacle for wiring later.
Carriage
  • Optional: align bearings so that ball races are offset as shown.

  • Clip Carriage onto Bearings. It will hold itself in place

  • Tighten Zip Ties. Cut them relatively flush to avoid them being an obstacle for wiring later.

  • This is the view from the rear of the Prusa. Make sure this is oriented correctly.

Insertar traducción aquí

Insertar traducción aquí

Insertar traducción aquí

Insertar traducción aquí

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.