Inglés
Español
Paso 10
PLA, though PETG can work Std version: this is similar to the stock Prusa extruder, where the PTFE is cut flat and terminates before the gears
Inlet choice [SP_inlet...]
  • PLA, though PETG can work

  • Std version: this is similar to the stock Prusa extruder, where the PTFE is cut flat and terminates before the gears

  • PTFE version: this has the PTFE pass through and needs to be cut tapered to fit between the gears. This is best suited for flexible filaments.

  • Optionally print at 0.1 layer with 0.25 nozzle for extra high precision for tightest fit with Bondtech drive gears. No escape for flexible filament!

Insertar traducción aquí

Insertar traducción aquí

Insertar traducción aquí

Insertar traducción aquí

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.