Saltar al contenido principal

Repara tus cosas

Derecho a reparar

Tienda

Inglés
Español
Paso 5
The device is pretty simple so far, but has no shortage of screws. There's no adhesive holding the U together, but were it not for our Magnetic Project Mat, all of these screws could get out of hand. So far we have encountered both Phillips and Tri-wing screws, nothing our 64 Bit Driver Kit can't handle. After some unscrewing, the front panel pops right off.
  • The device is pretty simple so far, but has no shortage of screws. There's no adhesive holding the U together, but were it not for our Magnetic Project Mat, all of these screws could get out of hand. So far we have encountered both Phillips and Tri-wing screws, nothing our 64 Bit Driver Kit can't handle.

  • After some unscrewing, the front panel pops right off.

El dispositivo es bastante sencillo, pero no va escaso de tornillos. No hay parte adhesiva sujetando la unidad, y si no fuera por nuestra Pizarra Magnética, todos estos tornillos podrían desparramarse. Hemos encontrado tanto tornillos Philips como de 3 puntas, nada que nuestro destornillador de precisión no pueda manejar.

Después de aflojar algunos tornillos, la parte frontal se extrae con suavidad.

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.