Saltar al contenido principal
Inglés
Español
Paso 3
CAUTION: Do not yank the casing apart!!! Gently pry from the bottom and work a finger along the side and until monitor pops in half. The speaker cabling is soldered to the main board and the speaker is stuck in the front casing with adhesive.
  • CAUTION: Do not yank the casing apart!!!

  • Gently pry from the bottom and work a finger along the side and until monitor pops in half.

  • The speaker cabling is soldered to the main board and the speaker is stuck in the front casing with adhesive.

  • Lay the two halves as shown.

Insertar traducción aquí

Insertar traducción aquí

Insertar traducción aquí

Insertar traducción aquí

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.