Saltar al contenido principal

Aviso: Estás editando una guía de prerrequisito. Cualquier cambio que realices afectará a todas las 3 guías que incluyen este paso.

Inglés
Italiano
Paso 2
The brackets are lightly adhered in place. Gently lift to unstick and remove each bracket, being careful not to bend it. If necessary, apply a little heat with a hair dryer or heat gun to soften the adhesive. (Putting an iOpener on the brackets is not recommended, as this may bend the spring contacts along the top.)
  • The brackets are lightly adhered in place.

  • Gently lift to unstick and remove each bracket, being careful not to bend it.

  • If necessary, apply a little heat with a hair dryer or heat gun to soften the adhesive. (Putting an iOpener on the brackets is not recommended, as this may bend the spring contacts along the top.)

Le staffe aderiscono leggermente alla parte sottostante.

Solleva delicatamente ciascuna staffa per staccarla e rimuoverla, stando attento a non piegarla.

Se necessario, applica un po' di calore con un asciugacapelli o una pistola termica per ammorbidire l'adesivo. (È sconsigliato disporre un iOpener sulla staffa, perché questo potrebbe piegare i contatti a molla disposti sulla parte superiore).

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.