Saltar al contenido principal

Repara tus cosas

Derecho a reparar

Tienda

Inglés
Español

Traduciendo paso 3

Paso 3
Leave the booster cables attached to both vehicles for approximately 10 minutes before attempting to start the Jeep.  If it does not start right away, wait 30 seconds and try again. Continue to try until it starts, taking short breaks in between attempts.
  • Leave the booster cables attached to both vehicles for approximately 10 minutes before attempting to start the Jeep. If it does not start right away, wait 30 seconds and try again. Continue to try until it starts, taking short breaks in between attempts.

  • Once the engine starts, let the Jeep run for about 5 minutes to recharge the battery.

  • In reverse order, remove the booster cables now that the Jeep is running and the battery has recharged.

Insertar traducción aquí

Insertar traducción aquí

Insertar traducción aquí

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.