Saltar al contenido principal

Repara tus cosas

Derecho a reparar

Tienda

Inglés
Español
Paso 2
Be careful with the booster cable clamp in order to avoid damaging your vehicle and getting electrocuted and NEVER allow the red and black cable clamps to touch each other. Bring out the booster cables. You must attach the cables in THIS order to the batteries of both vehicles: 1) Connect one red clamp to the positive battery terminal on the Jeep (it will be the red spot on the battery) (Picture 1)
  • Be careful with the booster cable clamp in order to avoid damaging your vehicle and getting electrocuted and NEVER allow the red and black cable clamps to touch each other.

  • Bring out the booster cables. You must attach the cables in THIS order to the batteries of both vehicles:

  • 1) Connect one red clamp to the positive battery terminal on the Jeep (it will be the red spot on the battery) (Picture 1)

  • 2) Connect the other red clamp to the positive battery terminal on the other working vehicle (Picture 2).

  • 3) Connect one black clamp to the negative battery terminal on the other working vehicle (the negative terminal will be black and next to the red, positive terminal) (Picture 2).

  • 4) Clip the other black clamp to an unpainted metal nut on a brace next to the Jeep's battery (Picture 3).

Insertar traducción aquí

Insertar traducción aquí

Insertar traducción aquí

Insertar traducción aquí

Insertar traducción aquí

Insertar traducción aquí

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.