Saltar al contenido principal

Aviso: Estás editando una guía de prerrequisito. Cualquier cambio que realices afectará a todas las 10 guías que incluyen este paso.

Inglés
Chino

Traduciendo paso 7

Paso 7
Press the new foot into place firmly with your finger, then apply pressure by pinching the foot from either side of the case with your finger and your thumb. Maintain pressure for 30 seconds to set the pressure-sensitive adhesive.
  • Press the new foot into place firmly with your finger, then apply pressure by pinching the foot from either side of the case with your finger and your thumb.

  • Maintain pressure for 30 seconds to set the pressure-sensitive adhesive.

  • Repeat the last seven steps for any remaining broken or worn feet.

用手指将新脚垫牢牢按入到位,然后用食指和拇指从机身背板的两侧捏住脚垫

按压 30 秒以使压敏胶生效

重复以上步骤,更换损坏或磨损的其它脚垫

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.