Saltar al contenido principal
Inglés
Español
Paso 6
Use a Phillips #0 screwdriver to unscrew the five 3.5mm screws holding the housing into the device. Use a spudger to pop it out of the back of the device exposing the motherboard. Use a spudger to pop it out of the back of the device exposing the motherboard.
  • Use a Phillips #0 screwdriver to unscrew the five 3.5mm screws holding the housing into the device.

  • Use a spudger to pop it out of the back of the device exposing the motherboard.

Insertar traducción aquí

Insertar traducción aquí

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.