Saltar al contenido principal
Inglés
Español

Traduciendo paso 1

Paso 1
Use a T5 Torx driver to remove the four 2.8 mm screws securing the RAM shield.
  • Use a T5 Torx driver to remove the four 2.8 mm screws securing the RAM shield.

  • If your device manufacturer opts to use notched T5 screws on this component, then a TR5 Security Torx will become necessary instead of a regular T5.

Utiliza el destornillador Torx T5 para quitar los cuatro tornillos de 2.8 mm que sujetan el protector de RAM.

[* red] Use a T5 Torx driver to remove the four 2.8 mm screws securing the RAM shield.
[* icon_note] If your device manufacturer opts to use notched T5 screws on this component, then a TR5 Security Torx will become necessary instead of a regular T5.

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.