Saltar al contenido principal
Inglés
Español
Paso 7
Unlatch the mechanism holding the ribbon wires in place then disconnect them from the motherboard. To access the wires, remove some of the black glue holding them in place with the spudger.
  • Unlatch the mechanism holding the ribbon wires in place then disconnect them from the motherboard.

  • To access the wires, remove some of the black glue holding them in place with the spudger.

Insertar traducción aquí

Insertar traducción aquí

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.