Saltar al contenido principal
Inglés
Español
Paso 5
Remove the four 7.9mm Phillips #1 screws along the black centerpiece of the device between the camera and the auxiliary port. Lift up the casing and circuit board but do not try and remove the ribbon wires. Lift up the casing and circuit board but do not try and remove the ribbon wires.
  • Remove the four 7.9mm Phillips #1 screws along the black centerpiece of the device between the camera and the auxiliary port.

  • Lift up the casing and circuit board but do not try and remove the ribbon wires.

Insertar traducción aquí

Insertar traducción aquí

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.