Saltar al contenido principal
Inglés
Español

Traduciendo paso 3

Paso 3
Unscrew the two 10 mm Phillips #2 screws and remove the dock and chip. The wiring harness is loaded through the bracket, so be careful when removing the chip. The wiring harness is loaded through the bracket, so be careful when removing the chip.
  • Unscrew the two 10 mm Phillips #2 screws and remove the dock and chip.

  • The wiring harness is loaded through the bracket, so be careful when removing the chip.

Insertar traducción aquí

Insertar traducción aquí

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.