Saltar al contenido principal
Inglés
Español
Paso 2
Gently insert the metal spudger between the lens and the lens casing. Rotate the spudger around the exterior of the lens and lens housing, separating them. The lens is held in place with an adhesive that will have to be applied during reassembly.
  • Gently insert the metal spudger between the lens and the lens casing.

  • Rotate the spudger around the exterior of the lens and lens housing, separating them.

  • The lens is held in place with an adhesive that will have to be applied during reassembly.

Insertar traducción aquí

Insertar traducción aquí

Insertar traducción aquí

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.