Saltar al contenido principal
Inglés
Español

Traduciendo paso 4

Paso 4
Locate the five solder locations on the underside of the gyroscope sensor board. Plug in soldering iron and wait for the tip tip to reach its target temperature.
  • Locate the five solder locations on the underside of the gyroscope sensor board.

  • Plug in soldering iron and wait for the tip tip to reach its target temperature.

  • Rest the tip of the iron on the solder and wait for the solder to melt. The wire will drop out of the sensor board.

  • Be aware of where the tip of the soldering iron is at ALL times. Put on safety glasses before picking up the soldering iron. Turn on a fan and face it towards the device to vent harmful fumes away from the solderers face.

Insertar traducción aquí

Insertar traducción aquí

Insertar traducción aquí

Insertar traducción aquí

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.