Inglés
Español

Traduciendo paso 1

Paso 1
Before you proceed, make sure you have properly backed up or transferred the data from your old hard disk drive. Use a Phillips #0 screwdriver to remove the two 2.5 millimeter screws holding the section of the case together.
  • Before you proceed, make sure you have properly backed up or transferred the data from your old hard disk drive.

  • Use a Phillips #0 screwdriver to remove the two 2.5 millimeter screws holding the section of the case together.

  • Slide the case off of the hard drive section.

Insertar traducción aquí

Insertar traducción aquí

Insertar traducción aquí

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.