Saltar al contenido principal

Aviso: Estás editando una guía de prerrequisito. Cualquier cambio que realices afectará a todas las 6 guías que incluyen este paso.

Inglés
Francés
Paso 5
Remove the following Phillips screws securing the speaker to the rear case:
  • Remove the following Phillips screws securing the speaker to the rear case:

  • Two 2.6 mm screws

  • One 2.3 mm screw

  • This screw may be covered by some tape.

  • One 2.3 mm screw

  • This screw is different from the prior one. Be sure not to mix the two together.

  • One 3.0 mm screw

Retirez les vis cruciformes suivantes qui fixent le haut-parleur à la coque arrière :

Deux vis de 2,6 mm

Deux vis de 2,3 mm

Une vis de 3,0 mm

[* black] Remove the following Phillips screws securing the speaker to the rear case:
[* red] Two 2.6 mm screws
[* orange] One 2.3 mm screw
+ [* icon_note] This screw may be covered by some tape.
[* yellow] One 2.3 mm screw
[* icon_note] This screw is different from the prior one. Be sure not to mix the two together.
[* green] One 3.0 mm screw

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.