Saltar al contenido principal
Inglés
Español
Paso 7
Now we apply a bit of "Z Tape" to the back of the module.  Z Tape is nifty stuff that conducts electricity through its thickness but not sideways.
A sticky situation
  • Now we apply a bit of "Z Tape" to the back of the module. Z Tape is nifty stuff that conducts electricity through its thickness but not sideways.

  • In this photo the release layer is still on the Z tape. We'll take it off before sticking the module onto the Series 2 Display.

Insertar traducción aquí

Insertar traducción aquí

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.