Saltar al contenido principal
Inglés
Español
Paso 29
Move back to the passenger side. Remove the gas tank old gasket.  I was able to slide this over the assembly without needing to remove it. Likewise, install a new gasket (shown in orange here).  Again, I could slip this over the existing assembly without much effort.
  • Move back to the passenger side.

  • Remove the gas tank old gasket. I was able to slide this over the assembly without needing to remove it.

  • Likewise, install a new gasket (shown in orange here). Again, I could slip this over the existing assembly without much effort.

  • Clean the mating surface of the gasket before installation to ensure a good seal.

  • Push the assembly back into place. The assembly has a tab to align it to the proper direction.

  • Do not make any connections yet.

Insertar traducción aquí

Insertar traducción aquí

Insertar traducción aquí

Insertar traducción aquí

Insertar traducción aquí

Insertar traducción aquí

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.