Saltar al contenido principal

Aviso: Estás editando una guía de prerrequisito. Cualquier cambio que realices afectará a todas las 7 guías que incluyen este paso.

Inglés
Español

Traduciendo paso 7

Paso 7
To avoid straining the display cables, don't open the display all the way yet. Open the display to about a 45° angle, and use tweezers to peel off the adhesive between the display and the Force Touch gasket. Thread the adhesive around and behind the display cables to get it off completely.
  • To avoid straining the display cables, don't open the display all the way yet.

  • Open the display to about a 45° angle, and use tweezers to peel off the adhesive between the display and the Force Touch gasket.

  • Thread the adhesive around and behind the display cables to get it off completely.

Para evitar tensionar los cables de pantalla, no la abras completamente todavía.

Abre la pantalla a un ángulo de 45° y usa pinzas para despegar el adhesivo entre la pantalla y la junta de Force Touch.

Pasa el adhesivo alrededor y detrás de los cables de la pantalla para quitarlo completamente, y presiona la junta hacia abajo para volver a adherirse a la caja.

Si la junta Force Touch se afloja y no se pega hacia abajo, debes reemplazar el adhesivo debajo de la junta y entre la junta y la pantalla.

[* icon_caution] To avoid straining the display cables, don't open the display all the way yet.
[* black] Open the display to about a 45° angle, and use tweezers to peel off the adhesive between the display and the Force Touch gasket.
[* black] Thread the adhesive around and behind the display cables to get it off completely, and press the gasket down to re-adhere to the case.
[* icon_reminder] If the Force Touch gasket itself comes loose and won't stick back down, you should replace both the adhesive underneath the gasket and between the gasket and the display
completely.
[* black] Thread the adhesive around and behind the display cables to get it off completely, and press the gasket down to re-adhere to the case.
[* icon_reminder] If the Force Touch gasket itself comes loose and won't stick back down, you should replace both the adhesive underneath the gasket and between the gasket and the display
completely.

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.