Saltar al contenido principal

Aviso: Estás editando una guía de prerrequisito. Cualquier cambio que realices afectará a todas las 7 guías que incluyen este paso.

Inglés
Español
Paso 2
Prepare an iOpener (or grab a hair dryer or heat gun) and heat the face of the watch until it's slightly too hot to touch.
Apply heat
  • Prepare an iOpener (or grab a hair dryer or heat gun) and heat the face of the watch until it's slightly too hot to touch.

  • Leave the iOpener on the watch for at least a minute to fully heat the screen and soften the adhesive holding it to the case.

  • You may need to reheat the iOpener, or move it around on the screen as sections cool, to heat the screen enough to pry it off.

Prepara un iOpener y calienta la pantalla para suavizar el adhesivo que lo sujeta en su lugar.

[*title] Apply heat
[*
black] [guide|11677|Prepare an iOpener|new_window=true],iOpener] (or grab a hair dryer or heat gun) and heat the displayface of the watch until it's slightly too hot to touch.
[* black] Leave the iOpener on the watch for at least a minute to fully heat the screen and
soften the adhesive securingholding it to the case.
[* icon_note] You may need to reheat the iOpener, or move it around on the screen as sections cool, to heat the screen enough to pry
it in placeoff.
[*title] Apply heat
[*
black] [guide|11677|Prepare an iOpener|new_window=true],iOpener] (or grab a hair dryer or heat gun) and heat the displayface of the watch until it's slightly too hot to touch.
[* black] Leave the iOpener on the watch for at least a minute to fully heat the screen and
soften the adhesive securingholding it to the case.
[* icon_note] You may need to reheat the iOpener, or move it around on the screen as sections cool, to heat the screen enough to pry
it in placeoff.

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.