Saltar al contenido principal

Repara tus cosas

Derecho a reparar

Tienda

Inglés
Español
Paso 10
Remove two Phillips screws (of the four holding together the entire device) from the brush/slip ring housing. These puppies didn't come out without a fight.
  • Remove two Phillips screws (of the four holding together the entire device) from the brush/slip ring housing.

  • These puppies didn't come out without a fight.

  • No wonder why -- they're over 3" long! Containing the inertia of the rotor spinning at 28,000 rpm is kind of important.

Insertar traducción aquí

Insertar traducción aquí

Insertar traducción aquí

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.