Saltar al contenido principal

Repara tus cosas

Derecho a reparar

Tienda

Inglés
Español
Paso 7
Onto the logic board, which may be the most important of all the internal goodies. It regulates all the aspects of operation and safety for the device. The logic board simply sits on brackets molded into the plastic housing. No screws! Disconnect a couple of spade connectors from it, and slide it out a bit to reach the control panel ribbon cable connector.
  • Onto the logic board, which may be the most important of all the internal goodies. It regulates all the aspects of operation and safety for the device.

  • The logic board simply sits on brackets molded into the plastic housing. No screws!

  • Disconnect a couple of spade connectors from it, and slide it out a bit to reach the control panel ribbon cable connector.

  • Disconnect the control panel ribbon cable from the board. This should almost free the logic board from the rest of the blender.

Insertar traducción aquí

Insertar traducción aquí

Insertar traducción aquí

Insertar traducción aquí

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.