Saltar al contenido principal
Inglés
Español
Paso 5
We begin our dissection by disconnecting a few connectors and removing a couple screws. It was clear the board wouldn't come out without first removing the triggers. So we decided to start with the left trigger button.
  • We begin our dissection by disconnecting a few connectors and removing a couple screws.

  • It was clear the board wouldn't come out without first removing the triggers. So we decided to start with the left trigger button.

  • The trigger button ribbon cables are connected to the board with ZIF connectors; a careful flick with the PSP opening tool released the clamp and freed the ribbon cable.

Insertar traducción aquí

Insertar traducción aquí

Insertar traducción aquí

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.