Aviso: Estás editando un prerrequisito para la guía que estabas viendo hace poco. Cualquier cambio que realices afectará todas las 5 guías que incluyan este paso.
Traduciendo paso 5
Paso 5


-
For the next connector, which is right next to the previous wire, there is a piece of tape attached to a metal bar.
-
Flip the metal bar over using the tape as a handle.
-
Next, grab onto the connector and slowly pull it from the socket in the logic board.
Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.