Saltar al contenido principal
Inglés
Francés
Paso 2
Place a heat shield over the other parts of the motherboard to avoid overheating. Heat the affected area with a heat gun to reflow the solder. Reflowing heats up all the soldering joints in an area so they become liquid enough to reinforce the bonds. This allows electricity to flow through the bond without unexpected resistance.
  • Place a heat shield over the other parts of the motherboard to avoid overheating.

  • Heat the affected area with a heat gun to reflow the solder.

  • Reflowing heats up all the soldering joints in an area so they become liquid enough to reinforce the bonds. This allows electricity to flow through the bond without unexpected resistance.

Insertar traducción aquí

Insertar traducción aquí

Insertar traducción aquí

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.