Saltar al contenido principal
Inglés
Español
Paso 10
Slide the inner barrel into the outer barrel assembly. Also place the small spring back in the slot on the right side, under the rear sight. Slide the entire assembly into the receiver, and reinstall the four screws that hold them together. Slide the entire assembly into the receiver, and reinstall the four screws that hold them together.
  • Slide the inner barrel into the outer barrel assembly. Also place the small spring back in the slot on the right side, under the rear sight.

  • Slide the entire assembly into the receiver, and reinstall the four screws that hold them together.

Insertar traducción aquí

Insertar traducción aquí

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.