Saltar al contenido principal
Inglés
Español
Paso 7
Apply a heated iOpener to the right edge of the phone. Slide the opening pick along the right edge of the display to separate the adhesive underneath.
  • Apply a heated iOpener to the right edge of the phone.

  • Slide the opening pick along the right edge of the display to separate the adhesive underneath.

  • Don't insert the pick more than 1 inch (25 mm) underneath the display to avoid damaging the home button cable.

  • The display and digitizer cables are located near the top of the display and may interfere with your pick if you pry too deeply.

  • Leave the pick in place to prevent the adhesive from re-adhering and grab a second pick as you proceed to the next step.

Insertar traducción aquí

Insertar traducción aquí

Insertar traducción aquí

Insertar traducción aquí

Insertar traducción aquí

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.