Aviso: Estás editando una guía de prerrequisito. Cualquier cambio que realices afectará a todas las 8 guías que incluyen este paso.
Traduciendo paso 1
Paso 1
-
Remove the following Phillips screws:
-
Remove the longer Phillips screw from the middle-rear of the modem shield.
-
Remove the three identical Phillips screws, two on either side of the EMI fingers, and the remaining one on the right side of the modem shield.
-
Remove the larger Phillips screw that secures the EMI fingers to the modem board.
-
Remove the EMI fingers.
Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.