Saltar al contenido principal
Inglés
Francés

Traduciendo paso 1

Paso 1
Remove the following screws from the metal power switch bracket between the rear facing flash and camera windows: Single 2.9 mm standoff screw
  • Remove the following screws from the metal power switch bracket between the rear facing flash and camera windows:

  • Single 2.9 mm standoff screw

  • Standoff screws are best removed using an [producto vinculado inexistente o deshabilitado: IF145-343-1] and driver handle.

  • In a pinch, a small flathead screwdriver will do the job—but use extra caution to ensure it doesn't slip and damage surrounding components.

  • Single 1.6 mm Phillips screw

  • Remove the metal power switch bracket.

Retirez les vis suivantes du support en métal du bouton marche/arrêt entre le flash arrière et les fenêtres de la caméra :

une vis standoff 2,9 mm

Même si ces vis ont la forme d'une vis cruciforme, le meilleur outil pour les enlever serait un tournevis plat de 2,5 mm.

une vis cruciforme 1,6 mm

Enlevez le support métallique du bouton marche/arrêt.

[* black] Remove the following screws from the metal power switch bracket between the rear facing flash and camera windows:
[* red] Single 2.9 mm standoff screw
- [* black] While these screws have a Phillips bit pattern, we found the best removal tool to be a 2.5 mm flathead driver.
+ [* icon_note] Standoff screws are best removed using an [product|IF145-343|new_window=true] and [product|IF145-326|driver handle|new_window=true].
+ [* icon_caution] In a pinch, a small flathead screwdriver will do the job—but use extra caution to ensure it doesn't slip and damage surrounding components.
[* orange] Single 1.6 mm Phillips screw
[* black] Remove the metal power switch bracket.

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.