Repara tus cosas

Derecho a Reparar

Partes y herramientas

Volver a la Guía
Inglés
Español
Paso 3
Identify the two mounting bolts on the rear of the caliper. Using a 12 mm wrench or socket, remove the two caliper mounting bolts. Alternatively, you may remove only the bottom mounting bolt and, using the top bolt as a hinge, rotate the caliper up and away from the rotor to access the brake pads. If you do this, skip the next step.

  • Identify the two mounting bolts on the rear of the caliper.

  • Using a 12 mm wrench or socket, remove the two caliper mounting bolts.

  • Alternatively, you may remove only the bottom mounting bolt and, using the top bolt as a hinge, rotate the caliper up and away from the rotor to access the brake pads. If you do this, skip the next step.

Insertar traducción aquí

Insertar traducción aquí

Insertar traducción aquí

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.