Saltar al contenido principal
Inglés
Español

Traduciendo paso 2

Paso 2
Remove the two T6 Torx screws securing the IR board to its bracket on the logic board. After removing these screws the IR board is completely free from the logic board and may fall.
  • Remove the two T6 Torx screws securing the IR board to its bracket on the logic board.

  • After removing these screws the IR board is completely free from the logic board and may fall.

  • Remove the IR board from your iMac.

Insertar traducción aquí

Insertar traducción aquí

Insertar traducción aquí

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.