Saltar al contenido principal

Aviso: Estás editando una guía de prerrequisito. Cualquier cambio que realices afectará a todas las 2 guías que incluyen este paso.

Inglés
Chino
Paso 5
Peel the backing off of the adhesive back of the small temperature sensor board. Adhere the temperature sensor board to an exposed, metal area of the surface of the SSD, as close as possible to the SATA connector. Fold the excess temperature sensor wires so that they are out of the way while you install the enclosure.
  • Peel the backing off of the adhesive back of the small temperature sensor board.

  • Adhere the temperature sensor board to an exposed, metal area of the surface of the SSD, as close as possible to the SATA connector.

  • Fold the excess temperature sensor wires so that they are out of the way while you install the enclosure.

将小型温度传感器板背面胶纸的防护层剥掉

将温度传感器板粘贴到固态硬盘表面的裸露的金属区域,尽可能靠近SATA连接器

将多余的温度传感器电线折叠起来,以免在安装机箱时受到影响。

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.