Saltar al contenido principal

Aviso: Estás editando una guía de prerrequisito. Cualquier cambio que realices afectará a todas las 153 guías que incluyen este paso.

Inglés
Alemán
Paso 16
Continue releasing the adhesive all the way along the bottom edge of the iPad. On iPad 4 models, insert the pick to a maximum depth of 1/2 inch (10 mm) in this area, to avoid damaging the home button ribbon cable.
  • Continue releasing the adhesive all the way along the bottom edge of the iPad.

  • On iPad 4 models, insert the pick to a maximum depth of 1/2 inch (10 mm) in this area, to avoid damaging the home button ribbon cable.

  • Leave the opening pick wedged underneath the front glass near the home button.

Fahre damit fort, den Kleber entlang der Unterkante des iPads zu lösen.

Bei iPad 4 Modellen darfst du den Pick in diesem Bereich höchstens 1,3 cm tief einschieben, du könntest sonst das Flachbandkabel zum Home Button beschädigen.

Lasse das Opening Pick eingekeilt unter dem Frontglas nahe dem Home Button.

[* black] Continue releasing the adhesive all the way along the bottom edge of the iPad.
- [* icon_caution] On iPad 4 models, insert the pick to a maximum depth of 1/2 inch in this area, to avoid damaging the home button ribbon cable.
+ [* icon_caution] On iPad 4 models, insert the pick to a maximum depth of 1/2 inch (10 mm) in this area, to avoid damaging the home button ribbon cable.
[* black] Leave the opening pick wedged underneath the front glass near the home button.

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.