Repara tus cosas

Derecho a reparar

Tienda

Aviso: Estás editando un prerrequisito para la guía que estabas viendo hace poco. Cualquier cambio que realices afectará todas las 12 guías que incluyan este paso.

Volver a la Guía
Inglés
Español
Paso 2
Use the plastic opening tool to gently pry the battery up, only at the outside edge of the phone. Prying anywhere else, especially near the logic board, may result in damage to the logic board. If the battery doesn't pry easily out of the case, apply a few more drops of isopropyl alcohol.
Prying up the battery

  • Use the plastic opening tool to gently pry the battery up, only at the outside edge of the phone. Prying anywhere else, especially near the logic board, may result in damage to the logic board.

  • If the battery doesn't pry easily out of the case, apply a few more drops of isopropyl alcohol.

  • Pry gently and evenly to avoid deforming the battery. A bent battery can be a fire hazard.

  • Do not pry at the top portion of the battery, you risk severing the volume control cables.

Apalancando la batería

Cuidadosamente utiliza la herramienta de apertura de plástico para levantar la batería con palanca, solo en el borde exterior del teléfono. Si intentas de levantar con palanca en cualquier otro lugar, especialmente cerca de la placa lógica, puede resultar en daño a la placa lógica.

Si la batería no sale fácilmente de la caja, recalienta y aplica de nuevo el iOpener e intenta otra vez.

Haz palanca cuidadosamente y equitativamente para evitar la deformación de la batería. Una batería torcida puede ser un peligro de incendio.

No hagas palanca en la parte superior de la batería porque puedes cortar los cables de control de volumen.

[title] Prying up the battery
[* icon_caution] Use the plastic opening tool to '''gently''' pry the battery up, '''only at the outside edge of the phone'''. Prying anywhere else, especially near the logic board, '''may result in damage to the logic board'''.
[* blackicon_note] If the battery doesn't pry easily out of the case, reheat and reapply the iOpener and try againapply a few more drops of isopropyl alcohol.
[* blackicon_note] If the battery doesn't pry easily out of the case, reheat and reapply the iOpener and try againapply a few more drops of isopropyl alcohol.
[* icon_caution] Pry gently and evenly to avoid deforming the battery. A bent battery can be a fire hazard.
[* red] '''Do not''' pry at the top portion of the battery, you risk severing the volume control cables.

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.