Saltar al contenido principal

Aviso: Estás editando una guía de prerrequisito. Cualquier cambio que realices afectará a todas las 11 guías que incluyen este paso.

Inglés
Chino
Paso 4
Remove the single 2.3 mm Phillips #000 screw securing the battery connector to the logic board. To reduce the risk of a short, you can use a battery isolation pick to disconnect the battery. Slide a battery isolation pick underneath the battery connector area of the logic board, and leave it in place while you work.
  • Remove the single 2.3 mm Phillips #000 screw securing the battery connector to the logic board.

  • To reduce the risk of a short, you can use a battery isolation pick to disconnect the battery.

  • Slide a battery isolation pick underneath the battery connector area of the logic board, and leave it in place while you work.

移除那一颗用来固定电池到主板的飞利浦#000 2.3毫米的螺丝钉。

为了防止短路,你可以用一个撬板来断开电池

将电池断开撬板滑入主板电池连接器下方,并将它放到适当的地方。

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.