Saltar al contenido principal
Inglés
Español
Paso 4
Use the Philips #00 Screwdriver to remove the screws on the bottom side of the camera. Make sure to grasp the camera because these are the last two screws that hold the camera in place. Carefully place the opening tool between the two covers and gently apply force upward to separate the covers.
  • Use the Philips #00 Screwdriver to remove the screws on the bottom side of the camera.

  • Make sure to grasp the camera because these are the last two screws that hold the camera in place.

  • Carefully place the opening tool between the two covers and gently apply force upward to separate the covers.

Insertar traducción aquí

Insertar traducción aquí

Insertar traducción aquí

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.