Saltar al contenido principal
Inglés
Español
Paso 6
Remove the two 3mm Phillips #00 screws that secure the speaker to the device. Remove the four 4mm Phillips #00 screws from the bracket. Locate the speaker cable connecting the speaker to the audio board. Gently tug on this cable to dislodge. Set the speaker aside.
  • Remove the two 3mm Phillips #00 screws that secure the speaker to the device.

  • Remove the four 4mm Phillips #00 screws from the bracket.

  • Locate the speaker cable connecting the speaker to the audio board. Gently tug on this cable to dislodge. Set the speaker aside.

Insertar traducción aquí

Insertar traducción aquí

Insertar traducción aquí

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.