Saltar al contenido principal
Inglés
Español
Paso 2
Remove the yellow tape from the circuit board that is connected to the USB port. Carefully unplug the two bundled cable connectors by pulling on them. Carefully unplug the two bundled cable connectors by pulling on them.
  • Remove the yellow tape from the circuit board that is connected to the USB port.

  • Carefully unplug the two bundled cable connectors by pulling on them.

Insertar traducción aquí

Insertar traducción aquí

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.