Saltar al contenido principal

Repara tus cosas

Derecho a reparar

Tienda

Inglés
Español
Paso 5
Disconnect the connector that is connecting the battery to the motherboard. Remove the battery. Next pull away the L2/R2 buttons from their positions. L2/R2 should be removed by carefully pulling vertically. Note There are two stubs on the side of it use a prying tool and gently pop them out. Two springs will come out with the triggers.
  • Disconnect the connector that is connecting the battery to the motherboard. Remove the battery.

  • Next pull away the L2/R2 buttons from their positions. L2/R2 should be removed by carefully pulling vertically. Note There are two stubs on the side of it use a prying tool and gently pop them out.

  • Two springs will come out with the triggers.

Desconecte el conector que conecta la batería a la placa base. Retira la batería.

A continuación, retire los botones L2 / R2 de sus posiciones. L2 / R2 debe eliminarse tirando con cuidado verticalmente. Nota: Hay dos trozos en el costado, use una herramienta de palanca y suavemente sáquelos.

Saldrán dos resortes con los disparadores.

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.