Saltar al contenido principal

Aviso: Estás editando una guía de prerrequisito. Cualquier cambio que realices afectará a la guía que incluye este paso.

Inglés
Español
Paso 2
Disconnect the battery cable from the system board.
Remove Old Battery
  • Disconnect the battery cable from the system board.

  • Remove the two screws (M1.6x4) that secure the battery to the palm-rest assembly.

  • Remove the six screws (M2x3) that secure the battery to the palm-rest assembly.

Desconecte el cable de la batería de la placa del sistema.

Retire los dos tornillos (M1.6x4) que aseguran la batería al ensamblaje del reposamanos.

Retire los seis tornillos (M2x3) que aseguran la batería al ensamblaje del reposamanos.

[title] Remove Old Battery
[* red] Disconnect the battery cable from the system board.
- [* orange] Remove the two screws (M1.6x4) that secure the battery to the palm-rest assembly.
- [* yellow] Remove the six screws (M2x3) that secure the battery to the palm-rest assembly.
+[* orange] Remove the two screws (M1.6x4) that secure the battery to the palm-rest assembly.
+[* yellow] Remove the six screws (M2x3) that secure the battery to the palm-rest assembly.

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.